|
I am not getting any results calculated...they all say zero?
Each calculation module check to be sure allof the required data
is entered before doing a calculaton. If the minimul required data
is not provided the calculation process will be aborted and all
results will be listed as "0".
As an example, a "column" is a member that
carries axial load, so if there is no axial load the calculation
will not be made. Similarly a "retaining wall" is a wall
that retains soil, so if the soil height is specified as "0"
then no calculation will be performed.
ALSO.....check that the "Automatic Recalculation"
option is turned on. This is specified on the Settings menu.
|
